Steelcraft HD Front Bumper Replacement for 2010-2018 Dodge Ram 2500/3500
Engineered to Fit. Made to Protect. Built to Last.
You take pride in your truck. Give it a bold front-end look to match. The Steelcraft HD12260RW HD Front Bumper Replacement brings diamond plate and Schedule 40 pipe construction to your 2010-2018 Dodge Ram 2500/3500. An E-coated, powder-coated semi-gloss black finish completes its rugged look. This version includes a winch mounting provision.
Key Features
- Diamond plate and pipe construction: Diamond plate and Schedule 40 pipe form the HD front bumper.
- Punch plate grille: Punch plate forms the grille section of the HD front bumper.
- Black semi-gloss finish: E-coated and powder coated with a clean, semi-gloss appearance.
- 1-year warranty: Steelcraft backs the HD12260RW with a 1-year warranty.
- Receiver provision: Consult the installation guide for application requirements.
- Winch tray: The guide lists a winch tray among the included components. Verify equipment selection and clearances before installation.
Fitment & Compatibility
- 2010-2018 Dodge Ram 2500
- 2010-2018 Dodge Ram 3500
- Position: Front
- Part Number: HD12260RW
- Finish: Black
- Application Notes: Winch Ready - With Receiver/Accommodates Front Camera & Adaptive Cruise Control - Excludes 10-12 Diesel
Confirm your model, model year and factory equipment before ordering. The application notes and exclusions above apply to the listed vehicles. Camera, cruise-control and sensor provisions must be checked for your specific configuration.
What's in the Box
- HD front bumper assembly.
- Mounting brackets listed in the installation instructions.
- Installation fasteners listed in the parts list. Retain any original hardware required by the instructions.
- Winch tray assembly. Confirm winch selection and mounting requirements separately.
- Access cover or cover plate listed in the guide.
- Sensor plugs, covers or seals as itemized in the guide; these are installation components, not replacement vehicle sensors.
Use the complete parts list to check the supplied components before removing the original bumper. Follow the guide for any factory components that must be transferred or reused.
Specs & Warranty
- Position: Front
- Construction: Diamond plate and Schedule 40 pipe
- Finish: Semi-gloss black; E-coated and powder coated
- Warranty: 1 Year
Installation Notes
Read the complete instructions before starting. Have assistance available and keep both the original and replacement bumpers supported during removal and installation.
- Cutting may be required; review the complete procedure before removing the original bumper.
- Follow the mounting sequence for your vehicle and check clearance and alignment before final tightening.
- Follow the guide for factory wiring and equipment where applicable, then inspect the installation and hardware as directed.
View the HD12260RW installation guide and complete parts list (PDF). These instructions may cover earlier model years or fewer configurations. Check that they match your vehicle and kit, or contact Steelcraft for the correct instructions.
Ask your Steelcraft dealer about part HD12260RW for your truck.
The Steelcraft Advantage
The HD series gives the front of your truck a distinctive diamond-plate profile, with Schedule 40 pipe and a punch-plate grille bringing the design together. A winch mounting provision lets you plan the setup around a compatible winch; the winch is not included. The E-coated, powder-coated finish completes the bumper.
Steelcraft brings more than 27 years of truck and SUV accessory experience, with U.S. facilities in Corona, California; Schertz, Texas; and Douglas, Georgia. Our lineup spans replacement bumpers, grille guards, running boards and more, supported by a network of dealers and distributors. Learn more about Steelcraft Automotive.
Where to Buy
Find a Steelcraft dealer and ask for HD12260RW. Have your model year, model and factory-equipment details ready to confirm the correct application.
Product Details
- Item: HD12260RW
- Title: 2010-2018 Dodge Ram 2500/3500 Front
- Year Make Model - Submodel: 2010 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2011 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2012 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2013 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2014 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2015 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2016 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2017 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2018 Dodge Ram 2500 - All Ram 2500 models
- Year Make Model - Submodel: 2010 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2011 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2012 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2013 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2014 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2015 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2016 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2017 Dodge Ram 3500 - All Ram 3500 models
- Year Make Model - Submodel: 2018 Dodge Ram 3500 - All Ram 3500 models
- Description: 10-18 Dodge Ram 2500/3500 Black HD Front Bumper Replacements
- Notes: Winch Ready - With Receiver/Accommodates Front Camera & Adaptive Cruise Control - Excludes 10-12 Diesel
- Finish: Black
- Warranty: 1 Year
- LTL: Yes
- Master UPC: 840813173948
- Ext. Description: Diamond plate & schedule 40 pipe, 1 year warranty, convenient receiver, punch plate grille, winch ready, semi-gloss finish and both E-coated and powder coated. Supports Front Emblem Cameras & Adaptive Cruise Control
- Category Tree: Heavy Duty - HD Front/Rear Replacements - Front